SY5400-5U1 | 5通电磁阀 插入式 底板配管型 阀形式

SY5400-5U1，5端口电磁阀，所有类型-新型
SMC通过重新设计的SY系列阀门提高了产品性能和可靠性。SY3000和SY5000的阀门宽度与前代相同，但流量增加了80%，从而使阀门尺寸得以减小。先导阀中的内置滤网可防止异物引起的故障。通过使用H-NBR密封材料作为主阀和密封件，提高了耐臭氧性。侧面、顶部和底部端口/管道方向可用于灵活安装。SY有阀体端口式或底座安装式，可单独使用或歧管安装。
流速高达1.0 Cv
可以以300 mm/s的速度驱动高达ø63的气缸
低功耗（标准0.35瓦）
滑动锁定手动超控提高了安全性
快速响应时间-10毫秒

5通电磁阀 SY5400-5U1插入式 底板配管型 阀形式
●流量增大，阀体尺寸减小
节能，省空间
●消耗功率: 0.1W(带节电回路)、0.35W(标准)
●寿命: 2亿次(间隙密封), 7000万次(弹性密封)
●对应插入式底板
●插入式金属底板(IP40)/插入式插件连接底板(IP67)
●集装式型号: SS5Y3, SS5Y5，SS5Y7

SY5000, 5 Port Solenoid Valve SY5400-5U1 , All Types – New Style
SMC has improved product performance and reliability with the redesigned SY series valve. The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved. Side, top and bottom port/pipe directions are available to allow flexible installation. The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

Flow rate up to 1.0 Cv
Possible to drive cylinders up to ø63 at 300 mm/s
Low power consumption (0.35 w standard)
Improved safety with slide locking manual override
Quick response time – 10 ms

SY5400-5U1其他特性